Search results

  1. U

    2001 8hp Yamaha wiring

    Here is what I'm looking at.
  2. U

    2001 8hp Yamaha wiring

    T8 PLRZ
  3. U

    2001 8hp Yamaha wiring

    I recently bought a 2001 8hp Yamaha kicker motor to put on my fishing boat. The kicker is already installed on another boat. I started to remove the Yamaha and when I began to remove the wiring from the motor it seems that the wiring harness at the motor has like a connection block where all of...
  4. U

    Bait and Livewell

    I'm in Utah and where we fish the water temp is high 60's to lower 70's. We haven't had too much trouble keeping fish alive in the live well but icing sounds like the way to go. Thanks again for all of the input.
  5. U

    Bait and Livewell

    Wow that turned into quite the discussion. After additional research, I agree with the one pump being discontinued theory. I can only find one pump and the line has been teed off. I also found that at the top of the tanks where the water comes into the wells, in a place you can only feel but not...
  6. U

    Bait and Livewell

    I really don't know where to ask this. I have a 97 Crestliner 1650 Sportfish with a baitwell and livewell. The switch for the wells has a setting for baitwell, Livewell and both. There is a pump in the splashwell that powers on in the baitwell position but I have no idea where the Livewell pump...
  7. U

    Rotary steering cable

    I removed the rotary steering cable at the helm on my 1997 Crestliner Sport fish. When I reinstall it is there a certain position that the steering wheel needs to be at before I start feeding the cable back in? Thanks
  8. U

    ID motor

    Thanks for the help.
  9. U

    ID motor

    Can someone ID this motor for me? Approx year and dependability?
  10. U

    97 Crestliner 1650 Sportfish

    Sorry, Does this help? The 3D printing is a good idea also.
  11. U

    97 Crestliner 1650 Sportfish

    Does anyone have an idea of where I could find the bow vent for this boat? It is just a plastic piece with a filter material that is about 4" long and maybe an 1 1/4" wide, held on by two screws.Thanks for any help.
  12. U

    97 90Hp Johnson trim tilt

    So yesterday I checked the hydraulic fluid level by putting the motor all of the way up flipping the stop bracket so it couldn't go back to the down position. Not that it showed any amount of settling. I removed the fill plug and oil ran out of the opening, so it seems as though it is full. Do...
  13. U

    97 90Hp Johnson trim tilt

    Is there a proper procedure to topping off the fluid? Like motor in the down position or up position?
  14. U

    97 90Hp Johnson trim tilt

    When any button is pushed up or down the tilt motor runs.
  15. U

    97 90Hp Johnson trim tilt

    I have 3 switches that control the motor. One on the motor one at the controls and one on the bow. When the buttons are pushed the tilt motor runs from all 3 controls but the motor will only raise. The tilt motor runs when in the down position but the motor does not lower.
  16. U

    97 90Hp Johnson trim tilt

    I have a 1997 90hp Johnson motor that when it is hot outside and it is in the down position I can raise it but then it won't go back down. It happened one day last year and now yesterday it did it again. I just checked it this morning and it worked fine, both up and down. My thinking is that it...
  17. U

    Shifter on 97 Crestliner with a 97 90hp Johnson

    I went back out and played with it and figured it out. Thanks
  18. U

    Shifter on 97 Crestliner with a 97 90hp Johnson

    A couple of weeks ago I had a friend show me how to press the center button on the shifter that allows you to keep the prop disengaged but the shifter set to a higher idle speed for easier starts when it is cold. Last week I took my boat out again and tried to use that feature but it would not...
  19. U

    97 Johnson 90hp won't lower

    Thanks for the ideas. I went out this morning and it worked just fine. I will check the fluid and make sure there is no air in the system. Thanks again.
  20. U

    97 Johnson 90hp won't lower

    Trim motor does spin. It sounds normal it just acts like it has reached it's maximum travel range.
Top