Search results

  1. Xcakes0X

    Serial # location on Chrysler outboards

    The plate location is on the mounting bracket and it’s faded so I was wondering if there was any other way to get the serial number.
  2. Xcakes0X

    Serial # location on Chrysler outboards

    I am looking at buying a Chrysler outboard but the serial number plate on the bracket with the serial number is faded. Is there anywhere else to find the serial like on the engine block?
  3. Xcakes0X

    69 Evinrude 6Hp correct spark plugs

    Alright thanks for the info!
  4. Xcakes0X

    69 Evinrude 6Hp correct spark plugs

    So I am almost done on working on an used 6hp evinrude fisherman I bought and I need for it a new set of spark plugs. I’ve found two answers online for what plug to use. The original manual says to use a champion j4c but people say online a j6c will work. I would rather go with the j6c if I can...
  5. Xcakes0X

    ‘69 Evinrude 6 Shifting Rod connecting problem

    I sanded it and it really helped but still leaked a little. What I did is I took some marine grease and applied it on both sides of the gasket and so far it hasn't leaked a drop since.
  6. Xcakes0X

    ‘69 Evinrude 6 Shifting Rod connecting problem

    Thanks I got it in! One more question I also put in a new thermostat and new gaskets for it. The gasket leaks after I sanded all the old gasket off should I just get some marine grease on it to seal it completely?
  7. Xcakes0X

    ‘69 Evinrude 6 Shifting Rod connecting problem

    I have a ‘69 evinrude 6hp I replaced the impeller in. When trying to insert the shifting rod off the lower unit into the connector that connects the 2 shifting rods I can’t get the lower unit shifting rod into the connector enough without making it so I can’t get my screwdriver in there to put...
  8. Xcakes0X

    1968 6 HP Evinrude need help

    I have a similar 6hp Evinrude here is what I would check. First with the outboard off I would make sure when you twist the handle the throttle linkage moves. Then make sure your using fresh, correctly mixed (50:1) gas because it sounds to me like that could be your issue. You need 3 components...
  9. Xcakes0X

    1969 evinrude 6 impeller size

    Makes plenty of sense to me and I’m glad I don’t have to buy a whole new housing now because the old one is in great shape. I appreciate it too I couldn’t find that info anywhere online.
  10. Xcakes0X

    1969 evinrude 6 impeller size

    There is a picture of the pump. Your saying if a bought the ‘79 impeller even though it is smaller I should have no cooling issues?
  11. Xcakes0X

    1969 evinrude 6 impeller size

    I got a used 1969 evinrude 6hp and decided to change the water pump in it. I looked up the part number (0277181) and ordered one. Once I got the impeller housing apart the old impeller and inside the housing was much smaller than the new one and the new one couldn’t go down over the old impeller...
View older results
Top