Search results

  1. M

    putting a 200hp on a 2002 trophy

    i have a 2002 trophy walkaround and the mercury 150 blew a piston and was hoping to go up in power it is rated for a 175 but would like to go higher. what is the max power i can put on the boat without damaging it would another 25 or 50hp damage the hull the weight difference is under a hundred...
  2. M

    mercury side control will not shift

    I have a mercury side control for a 150 it will not engage the lower unit cable is ok My question can they be rebuilt and is it worth it
  3. M

    2002 mercury150 bleeder system

    i have a 2002 mercury 150 it has been running rough and missing under load i found #5 cylinder bleeder line split and pumping out oil and fuel when its running i repaired the line and it seems to idle better on the muffs but cant water test until the weekend .my question is can this have caused...
  4. M

    2002 150 saltwater hesitates and misses

    I have a 150 saltwater series that hesitates when accelerating like a misfire and struggles to get on plane then the misfire will stop and rev to 5300 and run beautiful when I slow down it will misfire and buck ,idle seem to be more rough than usual.carbs were rebuilt new water seperator and...
  5. M

    2001 trophy walkaround prop

    I have a 2001 trophy walkaround 2002 with a 150 mercury the prop on it is a 15x17 aluminum its gouged a dented so i needto replace it my question is this the right prop for the boat i get around 35mph out of it 5100 rpm
  6. M

    2001 trophy 2002 dash switches faded

    i have a 2001 bayliner trophy walkaround model 2002 and all the labels for the switches are worn out and i cant read them i figured some of them out but three quarters of them do nothing does anyone have a picture or know what each switch is so i can label them here is a picture of the dash any...
  7. M

    mercury 150 poppet valve

    I i have a 2001 trophy walkaround with a 2002 mercury 150 saltwater edition i took it out for the first time and i got a steady alarm which is an overheat condition .i am replacing the thermostats and waterpump my question is does this motor have a poppet valve and how do i remove it .also are...
  8. M

    2002 mercury 150 saltwater will not idle

    i have a 2002 mercury 15o saltwater series it doesnt want to start unless its throttled real high once it starts it revs but will stall when it comes down .it sputters and it seems like it runs out of fuel the primer ball stays hard and i can see fuel in the clear filter fuel sample looks good...
  9. M

    minnkota foot controls

    i just bought a minnkota maxxum 55sc trolling motor and it did not come with directions i need some info on the foot controls like how does the large button work and the switch on the side i never had one before and i need to know how it works brfore i use it the first time thanks in advance
  10. M

    70 hp power trim motor replacement

    i have a 1992 70hp evinrude and the power trim motor went. does the engine need to be removed to replace it, any hints on replacing it
  11. M

    boat leans to the left at full speed

    i have a 17ft lowe fish and ski with a 70hp evinrude i have noticed when at full speed on plane the boat leans to the left and the steering wants to pull out of my hands is this a common problem and what can i do to fix it
  12. M

    standard horizon chartplotter 160 gps no sat reception

    i have a standard horizon 160 gps with no sat reception antenna seems ok it worked normally when it was removed last year.was told there my be a master reset which may be causing the problem.does anyone have an idea what could cause the problem display works normally
  13. M

    used lowe boat

    i just purchased this boat is their any issues that are common with these and was it a fair deal its a 92 lowe 17.5 fish and ski boat with a 70 evinrude. interior in great shape runs great with a roller trailer for $2500
  14. M

    92 evinrude 70 stalled while trolling

    i have a 92 evinrude 70hp my question is when i was trolling for about an hour the motor stalled out of the blue then had to crank for about 30 sec before it would restart.once it started i opened it up and it ran fine.did it flood fron idling too long,is their a limit how long you can troll...
Top