125 hp force not getting up to speed.

[derekshep]

Re: 125 hp force not getting up to speed.

well new update, switched the cdi packs, wouldnt start, so whatever is wrong is with the cdi pack #2 or anypart that has anything to do with it. checked the reeds today they were fine. checked all wiring again other than those on the stator and trigger cause dont hav the tools to pull the flywheel till neighbor gets home. would timing cause my problem of just the 3 & 4 cyl.? if not quessing it would either be the stator, trigger, or cdi pack #2?

 

[pnwboat]

Re: 125 hp force not getting up to speed.

Might want to check the stator. Disconnect the Blue and Yellow wires that come from the stator to #2 CD pack. Measure resistance between Blue and Yellow wires. It should be approx. 680 - 800 Ohms. You can compare the readings on the Blue and Yellow wires on the stator that you just purchased.

 

[derekshep]

Re: 125 hp force not getting up to speed.

Might want to check the stator. Disconnect the Blue and Yellow wires that come from the stator to #2 CD pack. Measure resistance between Blue and Yellow wires. It should be approx. 680 - 800 Ohms. You can compare the readings on the Blue and Yellow wires on the stator that you just purchased.

so just take my meter set on 2k ohms, and touch one to blue and the other to yellow

 

[pnwboat]

Re: 125 hp force not getting up to speed.

Yes. Do you have an analog or digital meter?

 

[derekshep]

Re: 125 hp force not getting up to speed.

digital