16 foot Starcraft SS

[wrmdunker]

Hey guys, I did a bit of interior front end resto on mine a few years ago and now want to do the splashwell.

Where did you guys get the boots and/or trim for the cable and wiring openings. Thanks in advance for sharing all your hard work and research.

I know this is not the best photo but if you have done it, you know what I mean. Mine is a 1974.

 

[matt167]

Re: 16 foot Starcraft SS

Most of that stuff is available right here on Iboats

 

[ShowMeGuy]

Re: 16 foot Starcraft SS

Most of that stuff is available right here on Iboats

Yup.. thats where I got mine for my 73 16' Super Sport..

 

[dozerII]

Re: 16 foot Starcraft SS

These are the better ones as they allow you to cinch down on the cables with a zip tie. They have them 3 sizes 4.5"3"2"
4-1/2" Motorwell Boot - T-H Marine Supply CB-4-DP - iboats

 

[wrmdunker]

Re: 16 foot Starcraft SS

Thanks dozer. I have looked at a lot of your resto work.

Actually, looking in more detail, my steering cable hits the ouside of the hole and doesn't budge, so I think I may just trim it with edge trim and rivet it in place. Not the best but better than what it was. Guy on eBay wrapped a 2 liter bottle to show how flexible it is. Thanks for the suggestions.

 

[dozerII]

Re: 16 foot Starcraft SS

Check with a local upholstery shop for some tractor seat edging, it is also very flexable and will fit the light aluminum of the splash well tight. The product you have listed is for 3/16"thick material.

 

[wrmdunker]

Re: 16 foot Starcraft SS

Thanks man. Love your creativity.