Oshkosh1
Ensign
- Joined
- Jun 8, 2009
- Messages
- 968
Greetings to all...
This being my first post, I will thank you all for the info I've gleened since I've been "lurking" the past few days.
I believe I need to rebuild my carb...
A few nights ago, I had been out, and the boat ran like a champ. When I headed for the dock and chopped the throttle....it died and I couldn't get it started again.
When I got home and looked at it, I noticed the primer bulb was not firm, so I gave it a squeeze. Fuel went spurtting out of the front of the carb...and when I tried to start it, it would not fire. I removed the plugs and they were sopped with fuel.
I would like to know how to: A. Find and obtain a rebuild kit and B. How difficult it is to rebuild it, if necessary.
The engine #is 35022, I believe the carb is the original...but I can't be sure as I'm not the original owner.
Thanks in advance.
This being my first post, I will thank you all for the info I've gleened since I've been "lurking" the past few days.
I believe I need to rebuild my carb...
A few nights ago, I had been out, and the boat ran like a champ. When I headed for the dock and chopped the throttle....it died and I couldn't get it started again.
When I got home and looked at it, I noticed the primer bulb was not firm, so I gave it a squeeze. Fuel went spurtting out of the front of the carb...and when I tried to start it, it would not fire. I removed the plugs and they were sopped with fuel.
I would like to know how to: A. Find and obtain a rebuild kit and B. How difficult it is to rebuild it, if necessary.
The engine #is 35022, I believe the carb is the original...but I can't be sure as I'm not the original owner.
Thanks in advance.