lindy46
Captain
- Joined
- Nov 27, 2008
- Messages
- 3,886
Re: 1969 40HP Johnson Outboard
With great difficulty. It's a two-man job. I usually put a long bolt in the rear recoil starter hole and jam a piece of wood between the bolt and the flywheel teeth. Have someone hold the wood in place while you put the torque wrench to the flywheel nut.
With great difficulty. It's a two-man job. I usually put a long bolt in the rear recoil starter hole and jam a piece of wood between the bolt and the flywheel teeth. Have someone hold the wood in place while you put the torque wrench to the flywheel nut.