Trim quit on me in the water. I wasn't able to get the motor up so I had to drain the hydraulic fluid out to hand pull up the motor so I could tow it home. There was a clicking from the solenoid so I replaced it to no help. Then I cleaned the elec connection to the batt and that sparked the trim motor back to life. Now the thing just runs without doing any trimming to the motor. I believe there is suffient hydraulic fluid but I could be wrong. I think the problem might lie in the fact that I drained the fluid out in the first place to bring the motor up manually. I'm really confused. Any suggestions would be very welcome.
