It's a DC 115 3301What kind of CD box do you have?
There are four OEM boxes and one aftermarket if I do not remember wrong.
Two from manufacture Delta and two from Motorola and one from aftermarket CDI Electronics.
The oldest one from Delta with two power transistors mounted on the housing would make a high pitched noise when powered with 12VDC.
The aftermarket CD box from CDI Electronics do the same and it is normal for these two typs of boxes.
The other typ from Delta I have no experience of and the two typs from Motorola do not have any noises.
Check which one you have.
BTW Do you have spark?
Is the engine running as it should?
It's the CDI electronics oneIt's a DC 115 3301
I can't get the engine to run or spark but it will turn overWhat kind of CD box do you have?
There are four OEM boxes and one aftermarket if I do not remember wrong.
Two from manufacture Delta and two from Motorola and one from aftermarket CDI Electronics.
The oldest one from Delta with two power transistors mounted on the housing would make a high pitched noise when powered with 12VDC.
The aftermarket CD box from CDI Electronics do the same and it is normal for these two typs of boxes.
The other typ from Delta I have no experience of and the two typs from Motorola do not have any noises.
Check which one you have.
BTW Do you have spark?
Is the engine running as it should?
It did that yesterday when I troubleshooted it I think it's the pickup in the distOkey, outboardignitiondotcom have troubleshoot chart for it.
This system is simple, you need power to the CD box from keyswitch blue wire, black to good ground and white/black to distributor.
When checking the CD box you have to have the keyswitch in ON position (12VDC to right terminal at distributor if you have a distributor with a preamp (electronic) and blue wire at CD box.
Set the top cylinder at TDC, remove the plug and ground the spark plug to ground.
Loose the white/black wire from distributor and scratch it to ground.
Each time you scratch the plug should spark.
If it does the CD box is good and there are something wrong in the distributor. Check the HT wires, rotor, rotor pin and the preamp.
Alright thank youNew preamp is 170 dollars or more...... uuuhh.
Ebay maybe have cheaper.