Help! Are the threaded puller holes in the flywheel standard or metric thread??
O Ol' Den Cadet Joined May 21, 2004 Messages 7 May 10, 2007 #1 Help! Are the threaded puller holes in the flywheel standard or metric thread??
tashasdaddy Honorary Moderator Emeritus Joined Nov 11, 2005 Messages 51,019 May 10, 2007 #2 Re: 1983 Evinrude 90 HP use #8 1/4 x 20 bolts, standard bolts will strip, leaving the threads in the flywheel, complicating matters. available at auto parts store about $1 a piece. here's some really good info. http://forums.iboats.com/showthread.php?t=181688
Re: 1983 Evinrude 90 HP use #8 1/4 x 20 bolts, standard bolts will strip, leaving the threads in the flywheel, complicating matters. available at auto parts store about $1 a piece. here's some really good info. http://forums.iboats.com/showthread.php?t=181688
Chinewalker Fleet Admiral Joined Aug 19, 2001 Messages 8,902 May 10, 2007 #3 Re: 1983 Evinrude 90 HP Actually, the bigger motors use 5/16 fine thread (24 tpi)... - Scott
tashasdaddy Honorary Moderator Emeritus Joined Nov 11, 2005 Messages 51,019 May 10, 2007 #4 Re: 1983 Evinrude 90 HP your right my mistake.
O Ol' Den Cadet Joined May 21, 2004 Messages 7 May 11, 2007 #5 Re: 1983 Evinrude 90 HP Thank You Scott! You saved me from a near screw-up !!
