Wormy_1709
Cadet
- Joined
- Oct 26, 2012
- Messages
- 8
I have a 1987 35hp Merc. It's been sitting for 2 summers. When I fired it up, the pee hole tube just had a little steam blowing out. If it's blowing steam that "should" mean that the pump is working correct? It just needs a new impeller? Also, the serial number is 0B205958, does this motor have a thermostat? I didn't leave it running really long at all once I realized water wasn't coming out. Lastly, any advice/tips/ or an online manual for replacing the impeller/pump on this motor? Any advice is appreciated. Thanks.