Re: 1988 120 Johnson Slow Quick Start
QuikStart advances the timing until the temp switch informs the powerpack that the engine water has reached >96? F. or, until the RPM reaches 1100, whichever occurs first.
If QuikStart is working properly, you can disable it by raising your warm-up lever enough to reach 1100 RPM, then lower it to normal.
Or, you can assure yourself that the temp switch with the black and white wire is connected and that the switch is working properly and that the engine temperature is reaching at least 96? on that bank of cylinders....
Early !988 120 and 140 models sometimes had a problem with the spark advance rod and adjustment stop not allowing the throttle plates to close completely. This resulted in a fast erratic idle. If you find that this condition exists on your engine, ask your dealer for Service Bulletin # 2201 and see if he can replace the adjustment stop if needed. Link and sync has to be redone after this service, so if you don't have the factory service manual and a copy of the service bulletin, it would be advisable to have your service department do the work.