1988 60hp Tilt n Trim

[washind]

Just took the boat & motor out from storage and the tilt/trim switch only results in a clicking noise (no up/down or motor sound). It worked like a charm last year.<br /><br />Any help or tips would be appreciated.<br /><br />Great forum!

 

[OBJ]

Re: 1988 60hp Tilt n Trim

I think I would start by disconnecting the two large wires (green and blue) that go to the TNT motor and jump a battery across them. Green wire to battery negative and blue to battery positive should make the engine raise. Reverse the jumpers and engine should go down. If this works, plug the motor leads back into the connector from the TNT relay box and try the switch again. <br /><br />Let us know what you find.

 

[washind]

Re: 1988 60hp Tilt n Trim

As usual, your advice was prompt and worked just great.<br /><br />Thanks again,<br /><br />Dave