1992 XR6 150 reed adapter plate hose barb

[Huntchuks]

While beating on my reed adapter plate to dislodge the gasket from the engine, I accidentally hit one of the tiny hose barbs on the side and broke it off. I'm not sure if those were a press fit or what but need to know if anyone has ever replaced one. Also need to find a suitable replacement barb.

 

[dingbat]

While beating on my reed adapter plate to dislodge the gasket from the engine, I accidentally hit one of the tiny hose barbs on the side and broke it off. I'm not sure if those were a press fit or what but need to know if anyone has ever replaced one.

Guessing they are pressed…given there are no means (hex) which to screw it in

 

[Huntchuks]

Guessing they are pressed…given there are no means (hex) which to screw it in

Yep, if I could find a same size replacement with threads, I could drill and tap right next to the original after plugging the original.

 

[dingbat]

Yep, if I could find a same size replacement with threads, I could drill and tap right next to the original after plugging the original.

Wouldn’t take much to press one back in

 

[Huntchuks]

Wouldn’t take much to press one back in

Right, might be hard to find a replacement. Haven't tried yet. I was hoping someone has done this and knows of a supplier.

 

[dingbat]

Right, might be hard to find a replacement. Haven't tried yet. I was hoping someone has done this and knows of a supplier.

Should be able to get from Mercury if nothing else

 

[Chris1956]

How about # 31 on this diagram? They look to be avail.

REED BLOCK AND CYLINDER HEAD - 1992 Outboard 150XR6 [ELPTO] 1150453MD | Crowley Marine

View parts diagrams and shop online for REED BLOCK AND CYLINDER HEAD parts, 1992 Outboard 150XR6 [ELPTO] 1150453MD. Offering discount prices on OEM parts for over 50 years. FAST $4.95 shipping available.

www.crowleymarine.com

 

[Dukedog]

use a dab of red Loctite on tha replacement when ya press it in... try not ta get it inside tha fitting...