1995 Force 120hp

[KevinSeiple]

I just purchased the above motor to swap with my 1979 evinrude 140hp.<br /><br />Looks like the harness going into the new Force is different. Like 7 circles inside, and one in the middle of them.<br /><br />what new harness do i need? or control box for this motor?<br /><br />Any help is appreciatted. Thanks!

 

[KevinSeiple]

Re: 1995 Force 120hp

what harness plugs into this?<br /><br /> http://www-alt.mercurymarine.com/PXImages/PartsCatalog/FORCE/820756/9_500.gif <br /><br />The end of Item 1

 

[roscoe]

Re: 1995 Force 120hp

Available at your local and friendly Mercury dealer.

 

[KevinSeiple]

Re: 1995 Force 120hp

What am i asking for though?

 

[roscoe]

Re: 1995 Force 120hp

Wiring harness (and controls ?) for '95 120hp.<br />I might start fresh with a new ignition switch too, and have a new wiring for my new motor.<br /><br />The dealer will know what you need to do it up right.<br />warning - This won't be free/cheap.

 

[KevinSeiple]

Re: 1995 Force 120hp

Got the controls last night.<br /><br />Included power tilt/trim switch<br /><br />ignition switch<br /><br />20 foot harness<br /><br />Ran me 280 dollars after taxes.

 

[KevinSeiple]

Re: 1995 Force 120hp

There are 4 wires and a round wire that come off the controls. The instruction manual doesnt say what the 4 small wires are for. The round plug is for the tach. Do these small wires connect to the power tilt/trim? or maybe the repair manual tells you about these....

 

[roscoe]

Re: 1995 Force 120hp

Going to need to know what controls (model), color of wires, etc.<br />Might be easier to study the wiring diagram a bit, and check to see what those same color wires connect to at the engine end.<br />Chances are they could be for the dash/gauges or for the tnt.