Captn Dave
Petty Officer 2nd Class
- Joined
- Dec 5, 2001
- Messages
- 176
My brother is looking at a boat that has a 1997 225 HP Ocean Pro on it. The engine is pretty clean, compression is 100 - 110 psi and lower unit it good but there seams to be some corrosion build-up around the head gasket area.
The boat was kept in the water so I assume it wasn't flushed after each use.
Is this a concern?
Should he be looking at anything else?
The boat was kept in the water so I assume it wasn't flushed after each use.
Is this a concern?
Should he be looking at anything else?