2 blade prop, now with pics! can anybody ID this?

[dutch135]

My neighbor cleaned out the shed to his newly acquired camp and came across a 2 bladed aluminum prop, that looks like it fits a mercury lower unit. I think it was something like a 19 pitch. Is there anybody that might be able to use this? Where are 2 blade props used? <br /><br />

 

[S.T. Marine]

Re: 2 blade prop, now with pics! can anybody ID this?

on older motors merc arond 9.8 hp let me have it

 

[dutch135]

Re: 2 blade prop, now with pics! can anybody ID this?

boy, this looks like a much bigger prop,, very similer to the ones i have had on my mercruiser 120 and mercury outboard 135. what is it worth?<br /><br />

 

[mellowyellow]

Re: 2 blade prop, now with pics! can anybody ID this?

my 70 merc 1150 came with a 2 blade from orig. owner.??? got more info? mine was beat and replaced it with a 3 blade... curious how a good 2 blade would perform?

 

[dutch135]

Re: 2 blade prop, now with pics! can anybody ID this?

mellow, i will try to get some numbers off of it tonight or tomorrow, if he neighbor comes to camp. it is a large prop, very similer to the 17 and 19 pitch ones i run on my v-6, i haven't seen one like this. and the neighbor just bought the camp and this prop was in the shed, so we don't know what boat it ever was on. actually , if i remember right, it is in excellant condition. hopefully i will have more info tomorrow.<br /><br />

 

[mellowyellow]

Re: 2 blade prop, now with pics! can anybody ID this?

kept the 2 blade as a spare, will see if I can <br />get a match to your prop's #'s

 

[sloopy]

Re: 2 blade prop, now with pics! can anybody ID this?

sounds like a sailboat prop to me! for a saildrve?

 

[dutch135]

Re: 2 blade prop, now with pics! can anybody ID this?

I took a couple pictures of this prop, It looks like a regular mercury prop, does anybody recognize it?<br />

<br /><br />

 

[dutch135]

Re: 2 blade prop, now with pics! can anybody ID this?

It looks like a 21 pitch,, but I forgot to measure the diameter. There is some damage on the other side where the hub is, there isn't the brass piece like i see on my aluminum prop, and there is some wear around the outer edge of the prop where it meets up against the lower unit casting. It looks like a new hub would be all that's needed. The neighbor would sell if somebody has a need for this prop.