20 hp Evinrude- no model # plate

Dougs50

Recruit
Joined
Nov 21, 2005
Messages
5
Sirs, I just purchased a used boat and motor. The boat is a 1992 Bass Tracker Aluminum boat. The motor on the boat is an Evinrude 20 hp manual start and tiller control. <br /><br />The Motor also has a decal of Evinrude plus a decal for Tracker. This looks to be a matched setup for boat and motor. My problem is the model number tag is missing. So I’m not sure of the model year. Is there another set of numbers that would associate with the year made?<br /><br />I found some other numbers on the motor that may help.<br /><br />Facing the motor from the front. There is a metal plug on the back left of the motor block with the numbers G622206. Another set of numbers on the left side of the block(on the block itself not a plug). 335636. And the other set is on center back on the bottom. This is a circle of numbers 1-12 with the number 89 in the center. <br /><br />Thanks for any help you may be able to give me. I’ll need a prop for this motor.
 

MCM

Lieutenant Junior Grade
Joined
Jun 1, 2005
Messages
1,201
Re: 20 hp Evinrude- no model # plate

Check on the top of the block for an aluminum freeze plug, the model# and serial# should be located there.
 

Dougs50

Recruit
Joined
Nov 21, 2005
Messages
5
Re: 20 hp Evinrude- no model # plate

Thanks mike. i'll look there. Have a good turkey day.
 

MCM

Lieutenant Junior Grade
Joined
Jun 1, 2005
Messages
1,201
Re: 20 hp Evinrude- no model # plate

You do the same :D
 

Dougs50

Recruit
Joined
Nov 21, 2005
Messages
5
Re: 20 hp Evinrude- no model # plate

Mikt, The freeze plug on this motor is on the left side facing from the front of motor with the number G2622208(I thought the last number was a 6 before).<br />Some other numbers I found while cleaning the carb. Fuel pump has a part number of 433386, 10-H-P Mexico.<br />Number on carb mx336527. Hope someone can help. I want to get the right manual and prop.
 

MCM

Lieutenant Junior Grade
Joined
Jun 1, 2005
Messages
1,201
Re: 20 hp Evinrude- no model # plate

That first set of #'s might be the serial#, we need the model#, in order to find the year of the motor etc. It should be located in the same spot as the serial#
 

Dougs50

Recruit
Joined
Nov 21, 2005
Messages
5
Re: 20 hp Evinrude- no model # plate

Ok thanks. i'll keep looking. My next order of business is to remove the prop. Hopefully there are some OEM numbers to go by. At least get me in the ball park.
 

Dougs50

Recruit
Joined
Nov 21, 2005
Messages
5
Re: 20 hp Evinrude- no model # plate

do you know of a web site to cross reference parts numbers such as the fuel pump/ carb. i've found some fuel pump numbers that are close to the one I have 433386. only the first 2 numbers match. the (43-----)Looks like I'm getting closer.
 

MCM

Lieutenant Junior Grade
Joined
Jun 1, 2005
Messages
1,201
Re: 20 hp Evinrude- no model # plate

The problem with that is alot of parts aren't specific to one motor or year. They may have been used on several hp motors over a period of several years. If you find that plug it will have both the model# and serial#.
 

Paul Moir

Admiral
Joined
Nov 5, 2002
Messages
6,847
Re: 20 hp Evinrude- no model # plate

The serial number seems to indicate very early 90s. Probably 1990.
 
Top