3 HP MODEL:5D10V

[johnMeadows]

I have a old motore that has been passed down to me that hasn't been started in 20 years. I filled it full of gas the other day and it started. I have a few leaks in it that I would like to fix.<br /><br />The only manual that came with it was a Johnson motore parts catalog 1958 for a 18 HP Model FD-FDL-12. I know this is not the correct manual but it seems quite similar as to the parts organization and placement.<br /><br />I would like to get a operators and parts manual for the model I have. Any help would be appreciated. I dont even know the year of this motor.

 

[rickdb1boat]

Re: 3 HP MODEL:5D10V

John<br /><br />Double check that model # 5D10V again. Can't seem to come up with that year with that number/letter combo.... Is that from the transom bracket plate??

 

[johnMeadows]

Re: 3 HP MODEL:5D10V

More information on the motor: <br /><br />On closer inspection of this motor I can just make out the name of "Eatons Viking" that is painted on the housing. <br /><br />On comparing the motor with the "18 HP 1958 Johnson parts catalog" that I have the physical layout is very similar. That is why I think it might be made by Johnson.<br /><br />I obtained the model and serial number off the motor transon plate. <br /><br />I am assuming that it is a 3 HP but I might be mistaken as the number is not clear it might be a 5. The whole line on the transom plate reads "? HP OBC certified <br />BHP at 4000 RPM" as I said the HP is either 3 or 5 as the number is stamped on and is not very clear.

 

[JB]

Re: 3 HP MODEL:5D10V

Hi, John.<br /><br />You probably have a Viking engine.<br /><br />I will move this to Other Outboards, where someone may recognize your model number.<br /><br />Good luck.