69 johnson 6hp 6r69m finding parts

C

Cap'n Chaos

Petty Officer 1st Class
Joined
Jun 4, 2010
Messages
290
Re: 69 johnson 6hp 6r69m finding parts

Yes.

Go to epc.brp.com and you can look up a parts diagram for your motor... that might help you out and you'll have some part numbers in case you find something that needs replacing while you're in there.

You'd really benefit from getting a service manual for your motor, it covers all of the maintenance and repair...and they only cost about $25 on Ebay. Don't bother with the Clymer or Seloc manuals, they are not worth the paper they are printed on in my opinion.
 
D

Daviet

Fleet Admiral
Joined
Sep 24, 2008
Messages
8,958
Re: 69 johnson 6hp 6r69m finding parts

Normally you would disassemble the lower unit and replace all seals and o-rings. It is possiable to replace the propshaft seal by drilling a small hole in the seal and insert a sheet metal screw and pulling the old seal out. Then use a piece of pipe the same size as the seal to install the new seal. Doing something like that can be a trial and error type of thing.
 
You must log in or register to reply here.
Top