75' 70 hp Johnson reverse lock problem

[adeshane]

the pin that works in my reverse lock system recently broke off when i was putting my boat in the water. I need to replace this bolt, but i have no idea where to find one or even what the name of this part is. If anyone can help i would be very greatful.

 

[tashasdaddy]

Re: 75' 70 hp Johnson reverse lock problem

are you speaking of the bolt the motor rests on, that goes from on bracket to the other, with a flip retainer on the end? if so it is 0383568 THRUST ROD & RETAINER 1 $43.46 USD available here or dealer. http://shop2.evinrude.com/ext/index.aspx?s1=bf6ad09c53cead335fcfd8a6471c0f7f

 

[adeshane]

Re: 75' 70 hp Johnson reverse lock problem

no thats not it what i need is the bolt for the manual trim. it broke off and now the engine stays down the all the time, but if i go into reverse the motor kicks up out of the water.

 

[rickdb1boat]

Re: 75' 70 hp Johnson reverse lock problem

Do you see the part in the picture below?

 

[adeshane]

Re: 75' 70 hp Johnson reverse lock problem

yes it's 10, 91, 92