86 bayliner cuddy capri

[pete j]

In the middle of my bayliner project and I need to remove the windshield. Problem is it dont have the bolts with nuts on them that went thru the fiberglass like every other boat Ive owned. Is there a special way bayliner did it and if so how the heck do I get it off. Any help would be great and thanks oops forgot only screw that I can find on the side windows at the very end and they go thru the top of the frame

 

[wrench 3]

I don't know about Bayliner but some windshields have a rubber insert on the outside that you have to pull out to expose the screws. It's a long strip below the glass.

 

[SeaDooSam]

I don't know about Bayliner but some windshields have a rubber insert on the outside that you have to pull out to expose the screws. It's a long strip below the glass.

Exactly what I was thinking and was going to say

 

[pete j]

I will check but I dont think it has a rubber strip anywere. It almost looks like you have to take apart windshield and the sides to expose the screws or bolts. on my way out to start checking and thanks for advice. well went out and removed tarp and sure enough theirs a strip with screws underneath. Again Thanks a lot