Hello this may be a little long sorry.<br />i have a 1993 mercury 90 HP outboard i got into the shallows with it and ended up with it in the sand, it sucked up enough to stop the stream from coming out the back to just a dribble.<br />i stopped the motor and lifted it out of the water until i got off the sandbar, when i put it back down in the water i was back by it and had the wife start it up there was a high pitched buzzer coming from the dash I had her shut it right off.<br />After the motor cooled I started it back up it still would not pump water but no alarm sound.<br />My question is after I drop the bottom and check / replace the impeller how would I check the motor and what would I look for.<br />Thanks