intruderdb
Recruit
- Joined
- Apr 15, 2023
- Messages
- 2
Good day, new to the forum. I have a 97 250 efi outboard, sn# 0G560075. I stoped using the boat about 1 month ago due to a worn bearing in the lower unit. I just replaced the lower unit with a new one for SEI. Went to start the motor and batteries were low so put a charger on them. Motor will crank now and some times it will fire then dies, but most of the time just cranks. I have checked the fuel pressure and that is good. I will be checking the ignition system next. I did pull the plugs and the plugs were wet, and they have been cleaned, still no fire. I don't know of anything that just replacing the lower unit would of caused this problem. Motor was running fine when I parked it. Any help would be appreciated. Thank Don B
