cardinal7769
Cadet
- Joined
- Jul 23, 2007
- Messages
- 6
It all started when one day when a bolt snapped in half. The bolt was one of the bolts that mounts the altenator. This caused the belt to give way and shred. Not knowing what happened I tried a few times to start the motor and of course I didn't get far. After replacing the bolt and belt I can't seem to get this motor to run for more than 10 seconds.
Is there anything elementry that was reset or timing problems that could have occured. Motor was running great prior to this tragedy. Any thoughts or help would be appreciated.
Is there anything elementry that was reset or timing problems that could have occured. Motor was running great prior to this tragedy. Any thoughts or help would be appreciated.