!986 - 2.5 with a alfa 1 drive. drive had a leaky bellows that left water into the boat along with getting into the drive. I changed the bellows along with the gimble bearing and put it back together without the alignment tool. it slid right together. the leak is fixed and changed the gear oil but I have a growling noise that is coming from the area of the drive. I will tell you that the noise started about the time I found the bellow issue. I thought the noise was the gimble bearing but that's new. is it possible that the drive be mis aligned and still go together and that be causing my noise. and its a loud growl.