any ideas on how to break power head lose?

bully-85

Recruit
Joined
Aug 26, 2009
Messages
3
I am trying to break a 96 115 powerhead lose from the exhaust plate. This one seems to have never been removed and is very tight. Any ideas willbe appreciated.
 

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
28,133
Re: any ideas on how to break power head lose?

Drop the lower unit. Attach hoist to powerhead, and make it tight enough to unload the transom. Make sure you have removed all the bolts. The old inline sixes had two bolts in the very front of the lower cowling, which were hard to find.

Spray some penetrating oil onto the studs. Push the powerhead side to side and back and forth to break it loose.
 
Top