I have a 1984 Bass Tracker with some soft spots on the main portion of the deck. The carpet is brown and old, and I was wondering if anyone with a Bass Tracker has done the repair themselves before.
I am fairly handy and have tools, and have located carpet and marine plywood. My question involves the removal of the side boards, getting around the fact that the boat is riveted, etc.
I have the boat in the shop currently getting a tune up and carbs rebuilt, but it will be back this weekend and I would like to begin refurbishing the boat.
Plans
--------
Replace rotten wood on deck
Replace ALL carpet (grey)
Replace livewell and rear compartment lids with custom build wooden lids, and coat with rhino-liner or truck bed liner to prevent future wear and protect against water
Paint center console black
Paint Trailer black (I'm thinking engine enamel might be a good choice since it's really durable)
I'm hoping to turn a tired looking 84 into an updated looking machine.
Any comments, suggestions, or know-how from someone who has done this before, or someone specifically familiar with bass trackers would be helpful.
Additionally, for the custom made storage compartment lids, does anyone know where I can get handle fixtures that screw right in that have recessions so the ring handle will be flush when closed?
Any pics of a similar restoration would be great as well.
I am fairly handy and have tools, and have located carpet and marine plywood. My question involves the removal of the side boards, getting around the fact that the boat is riveted, etc.
I have the boat in the shop currently getting a tune up and carbs rebuilt, but it will be back this weekend and I would like to begin refurbishing the boat.
Plans
--------
Replace rotten wood on deck
Replace ALL carpet (grey)
Replace livewell and rear compartment lids with custom build wooden lids, and coat with rhino-liner or truck bed liner to prevent future wear and protect against water
Paint center console black
Paint Trailer black (I'm thinking engine enamel might be a good choice since it's really durable)
I'm hoping to turn a tired looking 84 into an updated looking machine.
Any comments, suggestions, or know-how from someone who has done this before, or someone specifically familiar with bass trackers would be helpful.
Additionally, for the custom made storage compartment lids, does anyone know where I can get handle fixtures that screw right in that have recessions so the ring handle will be flush when closed?
Any pics of a similar restoration would be great as well.