Hello gentlemen, I'm looking for a good over all performer with more speed. My factory prop ( 13x19 K ) aluminum prop is not too bad, but has 19% slip at wot.
Application; 2003 Crestliner Fishhawk 1750 SC (1100 lbs) Deep V
2003 Yamaha F75 TRLB (375 lbs) 13x19 K aluminum Prop
350lbs gear ( batteries, Bow trolling motor, Fishing Equipment)
1 - 2 fishermen 220 lbs each.
Current performance: 35mph alone @5500rpm , 2 men 34mph @5400 rpm
Motor spec; F75 4stroke, 5000 - 6000 rpm, 20" shaft, 2.31 gear.
Any and all help would be greatly appreciated, motor was originally located in the 3rd hole from bottom, top speed was 33mph @ 5300. Raised motor to bottom hole, top speed 35.5 mph @5600. I have cavitation burns on back side of blades now. Lowered motor 1 hole, 35mph @5500 (2 men = 34 mph@5450). I believe the burns are from running at speed in larger swells 2' - 3').
Application; 2003 Crestliner Fishhawk 1750 SC (1100 lbs) Deep V
2003 Yamaha F75 TRLB (375 lbs) 13x19 K aluminum Prop
350lbs gear ( batteries, Bow trolling motor, Fishing Equipment)
1 - 2 fishermen 220 lbs each.
Current performance: 35mph alone @5500rpm , 2 men 34mph @5400 rpm
Motor spec; F75 4stroke, 5000 - 6000 rpm, 20" shaft, 2.31 gear.
Any and all help would be greatly appreciated, motor was originally located in the 3rd hole from bottom, top speed was 33mph @ 5300. Raised motor to bottom hole, top speed 35.5 mph @5600. I have cavitation burns on back side of blades now. Lowered motor 1 hole, 35mph @5500 (2 men = 34 mph@5450). I believe the burns are from running at speed in larger swells 2' - 3').