Boat value

mauro.

Petty Officer 3rd Class
Joined
Jul 15, 2024
Messages
96
I am wondering what you guys figure this Setup is worth that I have attached below.
Thanks in advance
Mauro
 

Attachments

  • Boat.pdf
    2.2 MB · Views: 18
  • 21ft.pdf
    434.1 KB · Views: 12

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,868
No one is going to download that.
If you want replies, post the photos properly.

But if this is legit, the answer is: it’s worth
What someone is willing to pay, based on condition, local market, and time of year.
 

mauro.

Petty Officer 3rd Class
Joined
Jul 15, 2024
Messages
96
how do you put them into pictures?
I am still trying to figure out what model it is but the brand is Glasply if I am not mistaken It is paired with the Mercruiser 888 the details are in the pdfs
 

mauro.

Petty Officer 3rd Class
Joined
Jul 15, 2024
Messages
96
Here is the description copied hope it comes through ok
will try with pics in a second

Features and parts 21 full cabin boat Engine, fully rebuilt ford 302. Machine shop work done by Automo ve Dans in Quesnell. Rebuilt Fall of 2025 Rebuilt Edelbrock 1409 marine 4-barrel carb 2 Flame arrestors Performance world Dual plane Aluminum intake Pertronix marine Distributor with Ignitor II module Highperformance 45000-volt igni on coil Taylor igni on cables NJK Br 6fs spark plugs Sealed power Hyp Pistons Sealed power cast rings Melling double roller ming set Melling oil pump Clevelite Bearings Comp cams marine camsha , li ers, and pushrods Fully rebuilt 351 heads with double valve springs from comp cams Thermostat Engine coupler All Fellpro gaskets Starter Also have original 2-barrel cast iron intake with Holley 2-barrel carb Barr marine Exhaust from previous owner manifolds previous owner never seen salt water Drive, Mer cruiser 888 in good condi on no leaks and fresh oil. Gears and U-joints are all to specs, 1:62 upper gear ra o. Have a full extra leg to go along although upper drive has a ra o of 1:32. Replaced all solenoids for starter and trim pump Replaced all transom bellows New water pump in leg Gimbal bearing Brand new Hustler aluminum 4 blade 19pitch prop Hydro fins Boat, Hull and stringers were supposedly done by previous owner although I have no other proof other than visual. I did all of the interior work and finished outside during past 3 years. Will sleep 2 comfortable but will need a ma ress. Have all the registry papers. Some features are. AJR windows Vinell Interior flooring LED outside ligh ng Farria gauges Hummingbird fish finder Wipers Independent 150 dB air horn One automa cally actuated bilge pump which turns on a red light on dash so that manually switched bilge pump can be turned on Mercury marine thro le Naviga on Lights (Green, Red, Yellow) 2 brand new 27 RV Cold Cranker ba eries Freshwater tank and pump not hooked up but tank is installed in its space Audio system with 2 10-inch subs and amplifier from Punch bass Juniper and birch interior Heater from engine coolant heat 2 brand new 27rv Ba eries Ba erie selector switch for bat 1,2 all or off. 2 interior lights in front berths Anchor and e down hardware mounted on boat Engine all new gaskets and seals Kiker 20hp Jhonson 2 stroke All igni on parts replaced including spark plugs Carb rebuilt New thermostat Fresh oil in leg Trailer, 1992 Ez-loader Galvanized steel trailer Has hydraulic brakes that will need a new piston at the hitch for full func on. Has all the papers for insurance
 

mauro.

Petty Officer 3rd Class
Joined
Jul 15, 2024
Messages
96
Hope this works if not let me know
 

Attachments

  • boat29.jpg
    boat29.jpg
    3.3 MB · Views: 1
  • boat22.jpg
    boat22.jpg
    2.1 MB · Views: 1
  • boat20.jpg
    boat20.jpg
    3.8 MB · Views: 1
  • boat19.jpg
    boat19.jpg
    3.9 MB · Views: 1
  • boat17.jpg
    boat17.jpg
    3.8 MB · Views: 1
Top