bravo II rebuild

[netting one]

Im looking to change the coupler,u joints,bellows,gimbal bearing all of it in my 98 proline. its all factory stuff. i also want to go through the out drive and replace the bottom half, its all pitted and has a big chunk out of it. were do i start to get all these parts? thanks dan

 

[dubs283]

Re: bravo II rebuild

most you will be able to find here on iboats

the ones you can't find are available at your local mercruiser dealer

btw - you are gonna need an OEM manual and some special tools to rebuild the lower half of your drive and they aren't cheap

 

[Bondo]

Re: bravo II rebuild

Ayuh,.... Everything mentioned in your 1st sentence is available here at iboats,...
Or Mercruiser,... Your Dealer, or on-line...

The lower unit will have to come from Mercruiser, or Used....

 

[Mischief Managed]

Re: bravo II rebuild

A Bravo 3 gearcase with the same pitch props you have on your B2 would be a really nice upgrade, and adirect bolt-on.

However, it's not really an option without changing the gearing in the driveshaft housing if you are running less than a 20" pitch prop on your B2 though; I'm pretty sure they don't make Bravo 3 props smaller than 20" pitch.