C D module cheap as chips ...make your own ..

[fucawi]

have a look at http://www.siliconchip.com.au/cms/A_110499/article.html a 16 year old kid could build one of these for under $25 with bits from radio shack.

will try to post a picture

 

[chrome dome]

Re: C D module cheap as chips ...make your own ..

Stone the flamin' crows Alf, geez you're a good bloke putting that up...ripper Rita, that's just up the road from Yabby Creek
ok enough of the Alfism's,
seriously, thanks for that,
might have to read it again a couple of times though..l ain't as smart as the average 16yr old

bookmarked it, thanks mate

 

[erikpn]

Re: C D module cheap as chips ...make your own ..

Too bad the diagrams on the webpage are not big enough to see and cannot be made larger, could be really useful.

 

[fucawi]

Re: C D module cheap as chips ...make your own ..

at the bottom right of your screen is a little 100% if you clik on it you can go to 400%.... I can read it ok on my screen at 100 %..

The comment on polarity does not apply to outboards as the wires from the charge coils can be reversed.

 

[anple]

Re: C D module cheap as chips ...make your own ..

would this work for a 1997 Force 120hp outboard? Thanks.

 

[fucawi]

Re: C D module cheap as chips ...make your own ..

if it has a charging coil and a trigger coil yes....one per cylinder or if you only have part of your switch box faulty build one for the cylinder thats out.