Cam Swap

[Trevordakid]

Swapping can in a gen 6 454 from a hydraulic roller to a stock roller cam. What all will I need to swap. Do I need to change the lifters and pushrods as well? The cam that is in it currently is a mild cam. Picture of the cam I purchased below.

 

[Bondo]

Swapping can in a gen 6 454 from a hydraulic roller to a stock roller cam. What all will I need to swap. Do I need to change the lifters and pushrods as well? The cam that is in it currently is a mild cam. Picture of the cam I purchased below.

Ayuh,..... I'd think it's just a straight up swap, but the only way to be sure is to measure everything,....

 

[Scott Danforth]

there is a limit to what you can put in a stock L29 Gen 6 before the valves meet the pistons.

you didnt attach any pictures