Carbs

[Simple_Man]

Over the fourth I found out I have mis-matched carbs on my 1987 85HP. I this a big deal? Also if I were to look for a "set" which model has the screw in seats ect, and can I use them on my motor.

 

[Jiggz]

Can you post pics? Are you referring to the part numbers of each carb not being the same or the physical appearance of each carb?

 

[Simple_Man]

the float needles are different sizes and use different style seats they work but I would like to find a set with the screw in air mixture seats will get pics as soon as i take them off

 

[Simple_Man]

after research I believe I have carbs from an 856x7a and a 856x7b. Slightly different but the same. I just have to remember that. Thanks anyway Jiggz

 

[Simple_Man]

ugh replaced the float needle and seat with the correct one now i cant get it adjusted. either wont seat and leaks fuel from the overflow and jet on the side. or it starves for fuel. top carb markings are 631061 WE9-1 11/86 middle carb 632061-1 WE18-2 12/86 bottom carb 632061-1 WE18-2 1/87. I am assuming the PO swaped the top carb I would like to find a set with the better float needle and seat, because the rubber seat with the retainer clip sucks. Any explanation of the part #"s would be helpfull in my srarch for a carb set