Carburetor Issue. Need help

Ternpest

Recruit
Joined
Jul 19, 2021
Messages
5
The black piece that receives gas broke.

I am not sure what to purchase. Am I going to need to replace the whole float assembly for the piece or would it even be included. It’s not shown in the prints I’ve found.
Please help.
 

Attachments

  • DB18E9D1-4D2C-4D2B-8A15-78A7F158CFAD.jpeg
    DB18E9D1-4D2C-4D2B-8A15-78A7F158CFAD.jpeg
    1.5 MB · Views: 7
  • image.jpg
    image.jpg
    2 MB · Views: 9
  • 97C9BA6B-FA1F-46DF-BFF9-B4DD7233C310.jpeg
    97C9BA6B-FA1F-46DF-BFF9-B4DD7233C310.jpeg
    1.5 MB · Views: 8
  • AC9D5BC6-1E32-45B6-AED7-5D9229D80306.png
    AC9D5BC6-1E32-45B6-AED7-5D9229D80306.png
    1.5 MB · Views: 8
  • image.jpg
    image.jpg
    1.7 MB · Views: 7
Last edited:

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,876
Ok-----So what part are you talking about / looking for ?----Your post is not very clear to me.
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,805
no need to change much ....try to locate an eqv. brass nipple if threaded

if not threaded in the carb body thread the body for a matching nipple .

or.... try to find just the plastic nipple
 

Ternpest

Recruit
Joined
Jul 19, 2021
Messages
5
no need to change much ....try to locate an eqv. brass nipple if threaded

if not threaded in the carb body thread the body for a matching nipple .

or.... try to find just the plastic nipple
First issue is the broken piece won’t turn or pull off. Is it safe to remove it by breaking the piece further
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,876
Find a used carburetor at your local boat shop.-----Find one on E-BAY.-----Drill and tap for pipe thread and a new nipple.----Choices are endless.-----Your location ?
 
Top