I have a 1988 Evinrude 150 (E150TXCC) that the overheating alarm came on this past weekend, then we had no power. I did a compression test today and this is what I got.
The left three cylinders were 62 psi same on all three. The right three were 30 psi on the top and 90 psi on the middle and bottom. I am thinking that the head gasket is shot. The power head was replaced about 5 years ago.
My questions are:
1) how long do head gaskets normally last?
2) I know that they say not to pay that much attention to the actual psi readings, just that they are all similar, what about from one side to another?
3) It looks like I have a problem with the right side, do I replace the head gasket on the left side as well, or just leave it?
Thanks,
The left three cylinders were 62 psi same on all three. The right three were 30 psi on the top and 90 psi on the middle and bottom. I am thinking that the head gasket is shot. The power head was replaced about 5 years ago.
My questions are:
1) how long do head gaskets normally last?
2) I know that they say not to pay that much attention to the actual psi readings, just that they are all similar, what about from one side to another?
3) It looks like I have a problem with the right side, do I replace the head gasket on the left side as well, or just leave it?
Thanks,