cooler cushion question

[rbigg]

What's a good, easy, inexpensive way of fastening cooler cushions down to the cooler lids so they don't fly off in the wind when running?

 

[glass from the past]

Re: cooler cushion question

Hey Rbigg,<br /><br />Just throwing my two ideas around, velcro? Or, never tried this, but what about using snaps like for a boat top, you could screw one side to the cooler lid and epoxy or sew? the other side to the cushion.

 

[quantumleap]

Re: cooler cushion question

Scantily dressed bikini models will do the trick.

 

[Dunaruna]

Re: cooler cushion question

I thought they their only role was to sunbake on the bow. Learn something new everyday.<br /><br />I use velcro on my esky cushion, not sewn in, just glued on. Aldo

 

[Bondo]

Re: cooler cushion question

quantumleap,<br />I Really like Your Idea.........<br /><br />But what I did to mine was,<br />When I had them made, the guy sewed on 4 little tabs near the corners,+ 2 strips of the uncomfortable side of Velcro to the bottom of them......<br />Then I added the Snaps in the tabs, along with screwing the other 1/2 to the Cooler..+ Glued the soft side of the Velcro to the Coolers....<br /><br />The Only problem so far is, the Velcro Doesn't Stick to the Igloo Cooler......<br />I'm thinking a pop-rivit every 6"s, centered in the Velcro, Should Fix Things........

 

[Ralph 123]

Re: cooler cushion question

You can buy them ready made with snaps or velcro. Just search here on iBoats for them. They are 100% marine and inexpensive. I think they are made by Tracy.