Factory Windshield Weather Strip

[DLNorth]

What have you guys used for weather stripping when you've installed your windshields?
I have yet to find anything that seems close.

Dan

 

[DLNorth]

Up date - I think I was over thinking this.
I found some on-line pics of SS 16's and got close up's of the windshields, and see that they are likely just using maybe 1/4" x 3/4" solid foam w/adhesive back.
This windshield is new to me/the boat so I haven't/hadn't seen exactly what was there.

Dan

 

[Scott Danforth]

the windshields come from TMS, so get the glazing from TMS http://www.taylormarine.com/hardware/parts/vinyls/index.html

 

[DLNorth]

Thanks Scott, but those look like the seal between the glass and frame, I'm looking for the seal between the frame and console. I didn't see one in that list that was the obvious choice.

 

[GA_Boater]

When I switched out my original plexi for a walk-thru, I used the sticky-back foam tape. It seems to work OK. If you go this way, get the densest you can find. It compresses a lot.

 

[Watermann]

Sourced at Home Depot.

 

[GA_Boater]

I don't remember seeing that bag of non-foam, WM. I woulda used that instead of the foam weatherstrip.

A ten year guarantee is a lifetime warranty for me.

 

[Watermann]

I don't remember seeing that bag of non-foam, WM. I woulda used that instead of the foam weatherstrip.

A ten year guarantee is a lifetime warranty for me.

Yeah the EPDM synthetic rubber should last.