flywheelpuller

[reeldutch]

finaly i got the flywheel of my 1989 115 hp evi<br />about a week ago i tried a puller that i bought at sears bud i bend all the studs from the puller and i got very frustated.<br />today i bought for 65 dollars a OMC puller and i pulled the flywheer right off.<br />So this is a good exemple of how good tools save you time and frustration and you wont break anything.<br />now this week i can finaly take a look at the crank.<br />If i have time for it because febr 28 my little boy was born and i love him very much.<br /><br />reeldutch

 

[rickdb1boat]

Re: flywheelpuller

Congrats on the new baby boy and congrats on getting the correct tool for the job!!!

 

[Hooty]

Re: flywheelpuller

Give that baby boy a coupla years and he'll take that flywheel off in pieces!<br /><br />Congratulations Reeldutch.<br /><br />c/6<br />Hooty

 

[R.Johnson]

Re: flywheelpuller

Here is one case! It's not just the puller, the proper bolts, And washers are just as important.

 

[ledgefinder]

Re: flywheelpuller

Way to go, reel!<br /><br />BTW, watch out for combo of little boy & 115. I let my 4-year old sit behind the wheel (115 on a light 16-footah). He went about 10 seconds at idle, then reached over & tried to punch it!<br /><br />For the first 6 months, the exhaust from your son will be all kinds of wierd technicolor hues and consistencies. Don't panic (like I did) perfectly normal & will settle down & look like human poop in about 6 months. Have fun!

 

[reeldutch]

Re: flywheelpuller

thanks ledge finder,<br /><br />the intake and exhaust from my newborn are working well i must say.<br />somethimes he runs a little rough and i hear all kinds of noises. his tell tale water outlet works fine to. The milege is 3 ounces every two ours and i premix formula and breastmilk to have the best for the internal parts of the baby.<br /><br />will keep u posted, runs like new.