acdc96
Chief Petty Officer
- Joined
 - Apr 23, 2013
 
- Messages
 - 412
 
Just drained the gas tank after years... I went to replace the fuel water separator and I could not get it off! I was using a standard oil filter wrench, had plenty of grip with no slip at all. I put 10 gallons in the tank so i could start the motor up after I changed the filter. I started the engine with the old one on and it ran fine but still don't trust it enough with the bad filter to do a sea trial. 
Any ideas on how to get it off?
I can answer most questions.
			
			Any ideas on how to get it off?
I can answer most questions.
                
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 