Gamefisher 9.9 question

slicktop

Recruit
Joined
Sep 19, 2008
Messages
4
I just picked up a used 9.9 Gamefisher really cheap. So cheap that if it does not work I will throw it away (just kidding). On the opposite side of the fuel inlet, below the choke it appears there was a switch or something. Anybody know what it was and where I might find one?
 

fishrdan

Admiral
Joined
Jan 25, 2008
Messages
6,989
Re: Gamefisher 9.9 question

The switch below the choke is for the safety lanyard. From the description, I assume your 9.9 is from the late 80's or 90's so it's the same as a Force outboard,,, which Mercury bought out. You can look up the part you need at Sears.com or Crowley Marine, both have the schematics and parts for the outboard.

What is the problem with the switch, is the lanyard clip inserted into the switch? The outboard will not start with the lanyard clip missing, or it will die if the lanyard clip is removed. You are supposed to attach the lanyard to yourself so if you get tossed overboard the engine will stop,,, and the boat will not run you over :eek:
 

slicktop

Recruit
Joined
Sep 19, 2008
Messages
4
Re: Gamefisher 9.9 question

Thanks for the answer but I am talking about the opposite side of the safety switch. I found out it was the stop switch which is now missing and has been discontinued by Sears. I am sure I can use something else.
 

CATransplant

Admiral
Joined
Feb 26, 2005
Messages
6,319
Re: Gamefisher 9.9 question

You can use any normally open pushbutton switch that will fit the opening. If the wires that connected to the switch have push on connectors, then buy a switch with spade terminals.

The stop switch just shorts two wires together when you push the button.
 
Top