Paterson00
Seaman
- Joined
- Nov 7, 2012
- Messages
- 51
USCG or Glasscraft label on the transom, consoles, under the dash or near the throttle?
Title/Registration from the seller? (depending on where you're located this can be a problem)
It's got an OB, you can start by figuring out what year the motor is, sometimes it's the same or very close to the year the boat was made....
Knowing it's length, transom beam (width), and maximum beam (often the width across the helm seats) can help after you get some info about Glasscrafts models, and their specs...
![]()
Well having the Admiral on board, whatever your choice, is a step in the right direction.
BTW: Pix Pix Pix can't post too many pix
Have a great weekend.......
The water coming into the lowered floor sounds a little concerning, especially with the soft spot. Have you checked the underside of the hull for cracks, repairs, etc?
I have. I havent found anything abvious yet. I will do a video of the boat in a bit more detail when I get a minute. Am I right in thinking that the boat will be a fibreglass hull with wood across the beam of the boat and a main "spine" through the middle also made of wood? If there is water sitting in the hull this will cause the wood to rot right?