Sergiosandiego
Recruit
- Joined
- Jun 3, 2009
- Messages
- 1
I recently took over the task to get my buddy's Pro Line CC boat, with a Yamaha 115 HP 4 stroke ready for the summer. He has not used it for about a year. I installed a new battery and replaced all corroded wires. The problem is that I can't get any electricity to the engine. None of the instruments work, no hydraulics. I looked for a kill switch (besides the one on the throttle) but can't find anything. My buddy says that he has not done anything to the boat or motor. The kill switch in the throttle is on. I don't see any wires that are broken or corroded. Pretty straight forward. Is there a switch or trick that I should be aware off. Some fuses? Again, I can't get any power to the engine. The key does not do anything at all. The boat is a late 1990s or early 2000 and the engine is 2004 and has only 20 hours. Any suggestions?
Thanks
Serge
Thanks
Serge