Re: Help!! The boat is too tall and won't fit in my garage!
How about cutting the vertical posts on the SS frame and installing couplers on the stubs that are left. The top of the SS frame could just be set back in place when needed. You could then have the screen cut down at a plastics place, or do it yourself, to the height needed. You may be able to use thinner material on the trailer bunks to cut a bit more height. If you want to save another inch or so of height in the windscreen, you could lower the pressure on the trailer tires a little and roll it into the garage.You can loet out a lot of air on a tire before the bead will come loose if you are not putting to much lateral force on them like when you go around a hard turn at speed. Once it's in position in the garage you could put jack stands under the trailer in a few spots to keep weight off the tires and leave them deflated. This makes them last longer anyway. Or you could reinflate them. Just remember to deflate them once again before you pull the boat out.
