Hesitates, stalls and dies '01 40hp 4 stroke

AlfaAlfa

Recruit
Joined
Jun 27, 2004
Messages
1
Data: 2001 40hp ML, changed spark plugs. Same problem<br /><br />Just put(bought through Iboat) the new used Merc on the boat. Started up and runs smoothly.<br />Shifted into gear and idled away warming up the thing.<br />Then wanted to have the boat in plane. The motor hesitates on pushing for more power, but then cuts out when getting into plane.<br /><br />Sum up of behaviour:<br />Sometimes hesitation on acceleration, sometimes not.<br />Always cuts out when pressing for power fast, but not at lowest power, but when reaching approx plane speed.<br /><br />Manages to reach max speed if fed power with a feathers touch. <br /><br />Always dies immediately when backing off the power abruptly.<br /><br />It simply needs a feathers touch on power control.<br /><br />Slight problem starting after the its cuts out.<br /><br />Any ideas?
 

Bomber13

Cadet
Joined
May 24, 2004
Messages
23
Re: Hesitates, stalls and dies '01 40hp 4 stroke

Whena an engine dies under nromal or fast acceleration, that usually means that the mixture is lean. If it sputters and then picks up, it is too rich. Adjust the low end on the carbs and that should cure the problem. :)
 
Top