Sharps-Nut
Seaman
- Joined
- Feb 22, 2004
- Messages
- 65
I have a 165 hp mercruiser io based on the 250 gm inline six cylinder. The prop that came on the boat is a 19 pitch and boat turns 4000-4100 at wot traveling 40mph. Thanks to you folks help I now realize that this is lugging the motor. Someones earlier post suggested that I should crank up to 4400 with this combo in wot. The prop is badlt dinged up The edges of this prop look like they were chewed on by beaver then the edge finished up by some sorta cruel ball pein hammer work. The edges measure over 1/8 think in places. There are several chips gone, one as large as 1/2" by 1" long. Will this old battered prop achieve wot for me. What prop do you think I should order as far as pich goes? The boat is a 1977 caravelle 18-1/2 foot trihull. The plans are for tubing and cruising in a fresh water lake. Open to thoughts as to what pich to start with. Or of you know tell me so and I will trust your opinion.