How to reset "Mantenaince Hours" in command link gauges?

[koloreando]

Hello friends, I need your help for reset this message "MANTENAINCE 100 HRS", this appear every time when the power on. My outboards: T60 High trust and command link gauges. Here in Cancun, Mexico nobody knows how to do this.
Thank you.

 

[rodbolt]

Re: How to reset "Mantenaince Hours" in command link gauges?

key on engine off, press and hold mode for 4 seconds
you will see custom mode.
press mode again to select trim zero set or maint.
maint will be flashing when you get it.
pres set and mode for 1 second to clear it.
press set again to return to normal display.

 

[koloreando]

Re: How to reset "Mantenaince Hours" in command link gauges?

Thanks for your answer, follow the steps you gave me and worked to perfection.
To serve the function of "trim to zero".
Thanks and a hug.

 

[rodbolt]

Re: How to reset "Mantenaince Hours" in command link gauges?

same process to set the trim to zero, in fact I mentioned that.
once your in custom maint mode you have to hit mode again until maint comes up blinking. then mode and set. then once it quits blinking, set to revert back to normal ops.
I do a couple a week and have done mine.
some you have to play with a bit but its simple, ya just gotta scroll to the correct maint function.

 

[koloreando]

Re: How to reset "Mantenaince Hours" in command link gauges?

Thank you very much and by your response that you've really helped a lot.
Thanks again and a hug