Andrew Leigh
Chief Petty Officer
- Joined
- Jun 17, 2003
- Messages
- 431
Hi all,<br /><br />despite my detailed pre-launch inspection and checks I forgot the PLUG.<br /><br />Fortunately there is no "no wake" zone where I launch. As the boat left the trailer I applied full throttle an was going to do a big U turn and come back to the jetty to moor.<br /><br />As I turned hard to starboard I saw water wash to the port side of the boat
and quickly realised that I was up to the floorboards. I immediately headed back to the slipway shouting for my friend to not remove the trailer from the water so that I could get the boat back on. He did not hear me so I "beached"
the boat gently on the concrete slipway with the motor down to assist in keeping the boat as high out the water as possible.<br /><br />I put the plug in and the boat was just able to float, back onto the trailer, drained the hull and went on to have a pleasant day out
.<br /><br />I was just so thankful that the boat did not sink.<br /><br />Don't think i'll do that again
.<br /><br />Cheers<br />Andrew