id of motor have pic no plates found!!!!!!

[shipwreck]

id of motor have pic no plates found

found a stamped marking on block...that it
every has told where to look and i have picture but
see pictures, i found where quarter plate sound be

i am look for model and year?

evinrude sport four ( fat four) 1960-1970 ish ?????????????
would love to find out model

 

[samo_ott]

Re: id of motor have pic no plates found!!!!!!

It's early 60's. You can go to this site and try and match up the hood. http://www.old-omc.de/

 

[F_R]

Re: id of motor have pic no plates found!!!!!!

Is the white paint on the lower part original? If it is, it is a 1967, only year they made white ones back then. The hood doesn't look exactly correct (?) The powerhead has been replaced, that's why the red primer and no welsh plug.
http://i155.photobucket.com/albums/s311/frankr_photos/196760hp.jpg?t=1179024690

 

[shipwreck]

Re: id of motor have pic no plates found!!!!!!

that would make sense, the lower unit is all white
i was think 1966
do know exact where they stuck id plates on this model?

i would love to know the model i have look up and sideways

it fires on first start every time, i give that for 60's motor
sorry your talk about the hood , yes it is org.

 

[tashasdaddy]

Re: id of motor have pic no plates found!!!!!!

read this: http://forums.iboats.com/showthread.php?t=195948

very possibly here, filled in with paint. http://forums.iboats.com/attachment.php?attachmentid=1928&d=1179022664

 

[F_R]

Re: id of motor have pic no plates found!!!!!!

You can see the ID plate in the picture that I posted. It is the rectangular black & silver plate on the port (left) stern bracket that attaches the motor to the boat. Your ID on the powerhead is missing because of the replacement powerhead.

The model number for a 1967 is 60733

 

[shipwreck]

Re: id of motor have pic no plates found!!!!!!

thank you , for post the plate is gone.

but think find model and year to work with assume!