the tilt motor runs but only move the boat motor with assitance (someone pushing on the force motor) the center piston is wet but the fuild is full and runs out of the motor housing when the plug is openned ( the previous owner said to put motor oil in it ) i didn't, but feared he did. the motor is longer then the trailor so it has to work right or i can't take it out of the water.
what are some other good preventive things to do to this motor?
1) i hear to pull the thermostat out to prevent any overheating problems
2) of cource to check lower fluid mine is wet on the outside will that means any use will allow water in and make the fluid milky
3) i was told to replace the impeller every year (that this motor will eat them)
4) just want to take it out its a 18' center console they say this motor may dino only around 100 hp ( that force chyrcler are overrated in hp) but still it should fly
i'm in kingsville md 6 miles from the bay
what are some other good preventive things to do to this motor?
1) i hear to pull the thermostat out to prevent any overheating problems
2) of cource to check lower fluid mine is wet on the outside will that means any use will allow water in and make the fluid milky
3) i was told to replace the impeller every year (that this motor will eat them)
4) just want to take it out its a 18' center console they say this motor may dino only around 100 hp ( that force chyrcler are overrated in hp) but still it should fly
i'm in kingsville md 6 miles from the bay